PRODUCTS
- Mechanical seal of boiler feed pump
- Mechanical seal of circulating pump
- Slurry pump mechanical seal
- Mechanical seal of desulfurization
- Mechanical seal of agitator
- Compressor mechanical seal
- Sewage pump mechanical seal
- Chemical pump mechanical seal
- Metal bellows mechanical seal
- Heat conduction oil pump mechanical
- Mechanical seal of sanitary pump
- Clean water pump mechanical seal
- Mechanical seal of booster pump
- Air-conditioning pump mechanical se
- Mechanical seal of reaction kettle
- Mechanical seal of Chinese standard
- Mechanical seal of paper pulp pump
- Mechanical seal of pressure screen
- Water pump accessories
Bien Amb (Hangzhou) Mechanical Seal Co., Ltd. specializes in the design, manufacture and sales of Austria ANDRITZ Andritz S,S3, S8 series pump mechanical seals. The friction pair material of the mechanical seal is non-pressure sintered silicon carbide SSIC, the rubber seal is F2463 high temperature resistant flurby rubber, and the spring is Hasloy. The structural parts are 304 or 316 stainless steel. Plain key drive, more stable than clamp and screw set drive. Waveform spring structure, stable elastic force is not easy to be blocked, suitable for all kinds of pulp working conditions. In ORDER to better meet the needs of customers, the pump type as long as the pump model can be quoted, all organic seals are in stock, pump shaft, impeller, coupling and other accessories can be matched.
The Andritz S3 series pulp pumps were designed and developed with four mechanical seals:
The first type: standard type, that is, single face conventional mechanical seal without flushing water scheme;
The second type: ACS1 type, that is, the single face assembly type mechanical seal without flushing water scheme;
The third type: ACS3 type, that is, the double face assembly type mechanical seal without flushing water scheme;
The fourth type: ACS2 type, that is, container-type mechanical seal with flushing water scheme.
Working parameters:
The temperature: - 10 ℃ to 100 ℃
Pressure: 1.5 MPa or less
Shaft diameter: 30-90 - mm
Wire speed: ≤15 m/s
Axial transmission capacity: ± 0.5mm
Common seal types:
AK5M-38 AK5M-48 AK5M-53 AK5M-65 AK5M-90
Common pump models:
S3-80-265 S3-100-265 S3-100-350 S3-125-265 S3-125-350 S3-125-400
S3-125-470 S3-150-330 S3-150-400 S3-150-470 S3-200-380 S3-200-470
S3-250-430 S3-350-470 S3-500-600 S8-80-265 S8-100-265 S8-100-350
S8-125-265 S8-125-350 S8-125-400 S8-125-470 S8-150-330 S8-150-400
S8-150-470 S8-200-380 S8-200-470 S8-250-430 S8-350-470 S8-500-600