PRODUCTS
- Mechanical seal of boiler feed pump
- Mechanical seal of circulating pump
- Slurry pump mechanical seal
- Mechanical seal of desulfurization
- Mechanical seal of agitator
- Compressor mechanical seal
- Sewage pump mechanical seal
- Chemical pump mechanical seal
- Metal bellows mechanical seal
- Heat conduction oil pump mechanical
- Mechanical seal of sanitary pump
- Clean water pump mechanical seal
- Mechanical seal of booster pump
- Air-conditioning pump mechanical se
- Mechanical seal of reaction kettle
- Mechanical seal of Chinese standard
- Mechanical seal of paper pulp pump
- Mechanical seal of pressure screen
- Water pump accessories
GX series mechanical seals are non-balanced type. As the name implies, GX series mechanical seals are generally used in low pressure conditions, and the pressure can be referred to as ≤0.8Mpa. GY series mechanical seals are balanced, as the name implies, GY series mechanical seals are generally used in high pressure conditions, can refer to the pressure ≤4Mpa. GX, GY series of mechanical seals are widely used, strong interchangeability, compact structure, mainly suitable for 1GX oil, gasoline, 2GX weak acid, weak alkali, 3GX small amount of particle impurities working conditions.
Working parameters
Rules: age from 25 to 100 mm
Pressure: 0.8 Mpa or less
The temperature: 0-80 ℃
Wire speed: ≤20m/s
Axial channeling momentum: ±0.5mm
Material combination
Sealing end face: graphite, silicon carbide, tungsten carbide, alumina
Auxiliary sealing: nitrile rubber, fluorine rubber, ethylene rubber, silicone rubber
Metal components: stainless steel, SUS304, SUS316L
The product description
Single face built in type
The balanced
Drive sleeve drive
Comply with EN12756(DIN24960) standards
In the development and design of any product, we follow the principle of installation size standardization. That is, the installation ruler of this type of mechanical seal is in accordance with international and domestic (API610, API682, DIN24960, ISO3069, GB6556).